Application:

1. DMX LED products.

2. LED pixel light,led pixel module.

3. LED strip,led light bar.

4.Outdoor Lighting Engineering.

Product Specifications：

1. Dimensions 115 * 72 * 32mm output data signal RS485.

2. Weight 200g storage interface SD card.

3. Exterior color gray 256 gray levels for each RGB.

4. Power Supply DC 5V Operating temperature -20 ~ 65 ℃.

5. The maximum power consumption of 5W Ambient temperature -20 ~ 65 ℃.

6. Output control port 1 port supporting software LED control software.

7. Maximum control pixels by 512 pixels controlled IC: DMX512.

Output port connection: ( Figure )

Coded connection:

Line -GND

Tier -D +

Three lines -D-

Four lines -PI

Five lines -NC

Note:

1.To reduce the risk of electric shock, fire or personal injury , read and follow the warnings and precautions

in order to prevent the occurrence of such events.

2. Do not install this controller in a magnetic and high-pressure environment.

3. To reduce the component due to a short circuit caused the fire and the risk of damage , make sure the

line is connected securely connected .

4. Make sure the controller altogether good ventilation and proper temperature environment.

5. Controller distance between the lamp within 10 m spacing lamps and lighting fixtures , please consult

the manufacturer over the pitch range , you can add a signal amplifier.

6. Make sure the power supply voltage DC5V.

7. Do not plug the power cable in the open , be sure to turn on the power connection is secure and properly

before the power .